PROPER SURFACE PREPARATION
Wheel blasting aims to remove wheel coatings so that steel wheels can be prepared for refinishing. Our blaster was engineered with a premium sealing system and curved blades to maximize shot impact and surface cleaning consistency.
- Fast throughput
- Increase operating efficiency
- Reduce labor and operating time
- Ease of maintenance
The combination of our shot blaster and our shot blast blend removes coatings without damaging the wheel or causing corrosion in the next life cycle. Our add-on vertical wheel lift reduces fatigue and strain while getting the wheel up off the ground and into the blaster.
Have our 2020 Blaster? Our updated PRO LINE III BLASTER increases wheels cleaned in the first pass by 77%. Is it time to upgrade?
AIR WASH SEPARATOR
Yes – Connected to dust collector
SHOT HOPPER WITH SHOT LEVEL SENSOR
Yes – Standard with blue light sensor
ELEVATOR BELT MOTOR
At the top of blaster
SHOT REFILL AREA
In the front or back
CERTIFICATIONS TO CODE
UL 508A Short Circuit Current Rating
Electrical Components are UL and CSA Rated
OVERALL DUST COLLECTOR DIMENSIONS
34″l x 33″w x 135″h
CERTIFICATIONS TO CODE
Filters MERV 15 per ASHRAE 52.2.2007
Electrical Panel, Components UL, CSA
Valves – YIOZ2.MH9011
Solenoid Valves – CSA
Exhaust Fan System – AMCA, EISA
Pressure Differential Gage, RoHS
*Dust collector is specifically engineered to work with our PRO LINE III Blaster
OVERALL BLASTER DIMENSIONS
32″l x 90″ w x 140″h
HORSEPOWER OF BLAST WHEELS
2ea x 15HP
OVERALL WHEEL LIFT DIMENSIONS OPTIONAL
27″l x 28″ w x 95″
30″l x 19″w x 40″h
30″ l x 19″w x 40″h
TMC specifies a 3.5 mil coating thickness to ensure proper coating, and achieving a full cure improves wheel torque and overall fleet safety.
Use of the wrong blast media can reduce wheel durability and decrease service life by damaging the wheel’s surface resulting in excessive etching, creating severe peaks and valleys requiring more coating to cover. This causes inconsistencies in the coating thickness.
Our shot is a blend of steel grit and shot, and removes coatings without damaging the wheel or causing corrosion in the next life cycle.
Learn about the rest of the equipment that makes up the MILCURE System
GET YOUR CUSTOMIZED QUOTE
Get in touch with us to get a customized quote on a MILCURE system that works for your shop needs!