PROPER POWDER COATING
Our PRO LINE III powder booth and powder coating gun were designed specifically for the wheel with special flow through panels to keep production flowing consistently, and a two-stage air filtering system to keep the air clean. It was also built with the operator in mind to keep their job efficient and safe.
- Stainless Steel Bottom for Ease of Cleaning
- Fire Retardant Canopy
- Built According to NFPA Specs
These features lead to less wasted powder, safety, and ease for the operator.
POWDER BOOTH FEATURES
ELECTRICAL
Custom Options Per Shop Locations
DESIGN
Small Footprint for Maximum Space Utilization
Reverse-Pulse Filter Cartridge Cleaning
Final Filters Returns Clean Air Into the workspace
CERTIFICATIONS TO CODE
NFPA 33 Standards for Spray Applications Using Non-Flammable or Combustible Materials
Control Panels UL508A Labeled
SCCR Short Circuit Current Ratings is 5kA
POWDER GUN FEATURES
DESIGN
Light and Balanced Ergonomic Design
Completely Field-Serviceable
100,000 volts delivering maximum first-pass transfer efficiency
CERTIFICATIONS TO CODE
Certified by FM for Class II Materials, USA and Canada
Hazardous Location Rating for Applicator: Zone 21 (EU) or Class II, Division 1, Group F and G
Hazardous Location Rating for Controller: Zone 22 (EU) or Class II, Division 2, Group F and G
POWDER BOOTH SPECIFICATIONS
OVERALL DIMENSIONS
63″l x 108″w x 83″h
INSIDE DIMENSIONS
5’l x 5’w x 5’h
AIR FILTERS
2 High-Efficiency 36″ Cartridge Filters
2 High-Efficiency Final Filters
MOTOR HP
3HP
INPUTS
120 VAC 20 Amp Outlet
8ft Ground Rod
ELECTRICAL
3ph/208,230,240,460,480,575/60Hz
*Dependent on shop location
POWDER GUN SPECIFICATIONS
ENCORE APPLICATOR
Input Rating – +/- 19 VAC, 1 A
Output Rating – 100 KV, 100μM
ENCORE CONTROLLER
Input Rating – 100-250 VAC 50/60 Hz
Output Rating – N/A
INPUT AIR
4.0-7.6 Bar (58-110 PSI)
MOBILE SYSTEM WITH VBF
Height – 32.25″
Height – 35.2″
Wheel Base – 23.5″
Weight – 103lbs
MOBILE SYSTEM 50LB FEED HOPPER
Height – 35.2″
Length – 32″
Wheel Base – 23.5″
Weight – 111lbs (50.4kg)
ENCORE NLIGHTEN LED KIT
*Light add on for gun
Weight – 1.09lbs (497g)
Primary Cell Type – (2) 1.5 V “AA” Alkaline (ANSI-15A, IEC-LR6) batteries
LED Output- 33 Lumens (1195 lux) & 65 Lumens (2313 lux)
AUTOMATE FOR LABOR EFFICIENCY AND THROUGHPUT
Do you have our current system, but you’re looking for more throughput without having to hire more operators? Adding the self-learning robot can do just that!

WASTED POWDER = WASTED MONEY
Our powder technology maximizes the efficient transfer of power to the wheel during application, delivering a more durable finish with less waste. Our powder was engineered with particle sizes designed to charge better, which equals better coverage and reduced missed areas on your wheels.
Competitive powders don’t experience the same charging effect – releasing powder from the powder gun into uncontrollable clouds and wasting powder.
Don’t believe it? See it for yourself! Contact us for a free powder evaluation.
POWDER THAT PRIORITIZES SAFETY
Our powder coating was specifically made to protect steel wheels from corrosion caused by the harsh conditions that commercial wheels drive through. Our patented technology maximizes the efficient transfer of powder to the wheel to deliver a more durable finish with less waste. The coating durability of our powder is comparable to standards set by OE wheel manufacturers.
- Less wasted powder
- Lowest applied cost
- Highest performance
- Consistent coating uniformity
Provide the best finish for less – order your IMI Powder today!
Learn about the rest of the equipment that makes up the MILCURE System
MAINTAINING YOUR MILCURE SYSTEM
Keeping up with your system maintenance is crucial to increasing uptime for your system and saving you money. Our service agreement was created to help you do just that!