Question 1

How Does IMI Tire Sealand work?

Accepted Answer

IMI Tire Sealant contains biodegradable fibers and recycled rubber particles in uniform suspension throughout a fluid carrier. When a puncture occurs, the escaping air forces the carrier and fibers to the penetration making a solid permanent repair from the inside . . . out!

Question 2

Does IMI Tire Sealant make a permanent seal?

Accepted Answer

Yes. IMI Tire Sealant will seal injuries to the crown area of the tire caused by puncturing objects up to 1/4” in diameter. However, it is not a vulcanized repair. If the tire is dismounted and IMI Tire Sealant is removed, new IMI Tire Sealant will need to be installed before returning to service.

Question 3

Will IMI Tire Sealant seal punctures in both tube types and tubeless tires?

Accepted Answer

Yes. In tube type tires, IMI Tire Sealant must be installed before a puncture occurs.

Question 4

Can your repair a tubeless tire after an injury occurs?

Accepted Answer

Yes. Simply install the IMI Tire Sealant through the valve stem with the puncture at the 6:00 position and inflate the tire. Roll the tire back and forth or drive the equipment. With IMI Tire Sealant on service trucks, tires can be repaired on the highway without removing the tire from the vehicle.

Question 5

Will IMI Tire Sealand seal a sidewall puncture?

Accepted Answer

No. IMI Tire Sealant may slow sidewall leaks but will not seal.

Question 6

What size of injury will IMI Tire Sealant seal?

Accepted Answer

IMI Tire Sealant will permanently seal “nail hole” injuries up to 1/4” in diameter in the crown area of the tire.

Question 7

What are the reasons why a tire containing IMI Tire Sealant will go flat?

Accepted Answer

95% of the cases are caused by not enough IMI Tire Sealant installed in the tire. Refer to the Application Chart. Alternatively, if injury to the tire is larger than 1/4” in diameter, or if you are attempting to repair a tube type tire after it has gone flat, or if there are injuries that exist outside the crown area of the tire, they could contribute to the tire going flat.

Question 8

When IMI Tire Sealant seals multiple punctures in the same time, is it possible that one or more of the punctures could unseal?

Accepted Answer

No. IMI Tire Sealant will form a permanent seal for the tread life of the tire.

Question 9

Will IMI Tire Sealant clog valve stems when checking tire air pressure?

Accepted Answer

While it is possible for IMI Tire Sealant to clog valve hardware, it is a rare occurrence and easy to remedy. IMI Tire Sealant is designed to be drawn to the location of escaping air. Accordingly, it will be pulled into the valve stem if, for example, the tire pressure is adjusted by holding the valve open. If a blockage occurs, simply add a small amount of air to the tire– the pressure from a normal inflation procedure will clear the blockage.

Question 10

Will IMI Tire Sealant in any way cause damage to the tire, innerliner, or tube?

Accepted Answer

No. Confirmed by independent testing. For more information, please contact IMI.

Question 11

Is IMI Tire Sealant compatible with the retreading process?

Accepted Answer

Yes.

Question 12

Will IMI Tire Sealant void tire warranties?

Accepted Answer

No.

Question 13

Can a proper tire repair be made to a tire that has had IMI Tire Sealant installed?

Accepted Answer

Yes. Simply remove the IMI Tire Sealant from the area to be repaired and follow recommended tire repair practices.

Question 14

Will IMI Tire Sealant corrode wheels and rims?

Accepted Answer

No. IMI Tire Sealant will serve as an anti-corrosive agent to prevent rim rust.

Question 15

Will IMI Tire Sealant cause corrosion in high temperature applications such as waste haul?

Accepted Answer

No. IMI Tire Sealant is specially formulated with corrosion inhibitors that are effective at high temperatures. This has been repeatedly demonstrated through intensive real-world waste haul applications.

Question 16

What is the boiling point of IMI Tire Sealant?

Accepted Answer

IMI Tire Sealant boils at 221˚F (105˚C) at regular atmospheric pressure. Inside a pressurized tire and wheel assembly, the boiling point of IMI Tire Sealant rises considerably. For example, at 120 psi the boiling point of IMI Tire Sealant is ~374˚F (190˚C)–well beyond extreme operating limits and the source of such heat could cause serious tire damage before reaching this temperature.

Question 17

What is the freezing point of IMI Tire Sealant?

Accepted Answer

The freezing point of IMI Tire Sealant is -10˚F (-23˚C).

Question 18

Is IMI Tire Sealant water soluble?

Accepted Answer

Yes. When necessary, simply wash out IMI Tire Sealant from the tire with water.

Question 19

Is IMI Tire Sealant safe for disposal?

Accepted Answer

Yes. It is recommended that IMI Tire Sealant be rinsed out of the tires with plenty of water and sent down the drain to the local wastewater treatment plant. Contact your local authorities to dispose of IMI Tire Sealant in accordance with local, state and federal regulations.

Question 20

Can IMI Tire Sealant be reused?

Accepted Answer

No. The ingredients of IMI Tire Sealant are blended precisely to be completely effective for the tread life of one tire and safe for the environment.

Question 21

Does IMI Tire Sealant contain elthylene glycol or propylene glycol?

Accepted Answer

No.

Question 22

What is the shelf life of IMI Tire Sealant?

Accepted Answer

The shelf life of IMI Tire Sealant is two years.

Question 23

Where can I purchase IMI Tire Sealant?

Accepted Answer

The IMI family of tire sealants are available for purchase through one of our authorized resellers. Speak with one of our customer service representatives, who can connect you to a dealer in your area.

UPS WHEEL PART NUMBERS & SPECS

NEW WHEELS & VALVE STEMS

WHITE RENTAL WHEELS

POWDER COATING FOR WHEEL REFINISHING

NEED FURTHER ASSISTANCE?